Main Menu

 New England Endura 12                                

PRODUCT DESCRIPTION:

 New England Ropes introduces Endura 12, our latest single braid high tech rope using an Ultra High Molecular Weight Polyethylene (UHMWPE) fiber for light weight, low stretch, and torque-resistance. It is a 12-strand single braid construction that is vinyl coated for increased durability and color coding.

FEATURES:

• Excellent Strength-to-Size Ratio
• Ultra Low Elongation
• Light Weight
• Easily spliced
• Excellent flexibility
• Floats
• Excellent Wet/Dry Strength Retention
• Torque-free

APPLICATIONS:

• Halyards
• Sheets
• Low stretch control lines
• Guys

• Slings/Hoisting Ropes

TECHNICAL SPECIFICATIONS:

Compliance to the above specifications is based upon testing according to the Cordage Institute Standard Testing Methods for Fiber Rope and/or ASTM D-4268 Standard Methods of Testing Fiber Ropes.
Weights - Are average and may vary +/- 5%
Tensile strengths: Are approximate average for new, unused ropes. To estimate the minimum tensile strength of a new rope, reduce the approximate average by 10% (Cordage Institute defines minimum tensile strength as two standard deviations below the average tensile strength of the rope).

WORKING ELONGATION:

CHEMICALS:

Good resistance to most minerals/organics, acids, and weak alkalis. Excellent resistance to bleaches and other oxidizing agents and to most solvents.

SUNLIGHT/UV:

Very little degradation from UV. Can be used outside over long term if inspected regularly.

HEAT:

Melting point of UHMWPE is 300°F with progressive strength loss above 150°F.

DIELECTRICS:

The UHMWPE fiber has good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercise any time a rope is in the proximity of live circuits.

SHEAVES:

Recommended D/d* ratio is 8:1

(* Sheave Diameter to Rope Diameter)

COATING:

Proprietary vinyl coating to improve abrasion resistance, UV resistance, and to create a water barrier.

SPECIFIC GRAVITY:

0.97

COLORS:

Coated Clear, Red, Blue, & Grey

WORKING LOADS:

No blanket working load recommendation can be made because it depends on the application and conditions of use, especially potential danger to personnel. It is recommended that the user establish working loads and safety factors based on professional and experienced assessments of risks. The working load is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved. Or exceptional service such as shock, sustained loading, severe vibration, etc. The Cordage Institute specifies that the Safe Working Load of a rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses, 15 for life lines.

SLK= Minimum Break Strength / Safety Factor

STANDARD LENGTH:

600 ft

SPLICING INSTRUCTIONS:

12-Strand Lock Stitch

Use the following color codes for X when ordering:  1=RED; 2=Green; 3=Blue; 8=Grey