New England Double Braid Nylon
PRODUCT DESCRIPTION:
New England Ropes Nylon Double Braid is manufactured with premium high tenacity nylon fibers and conforms to MIL-R-24050E. Nylon - Double Braid is the ideal choose when energy absorption is the key design factor.
FEATURES:
- High elongation
- Torque-free non-hockling
- Stays flexible and very easy to handle
- Splices well
APPLICATIONS:
- Dock & Anchor lines
- Mooring lines
- Tow lines
- Surge pendants
TECHNICAL SPECIFICATIONS:
| Product Code (White) |
Diameter | Weight (Lbs/100 ft.) |
Tensile (Lbs.) |
|
|---|---|---|---|---|
| Inches | mm | |||
| 2010-06 | 3/16" | 5 | 0.9 | 1,200 |
| 2010-08 | 1/4 " | 6 | 1.6 | 2,200 |
| 2010-10 | 5/16" | 8 | 2.5 | 3,400 |
| 2010-12 | 3/8 " | 9 | 3.6 | 4,900 |
| 2010-14 | 7/16" | 11 | 4.9 | 6,600 |
| 2010-16 | 1/2 " | 12 | 6.3 | 8,500 |
| 2010-18 | 9/16" | 14 | 8.0 | 10,800 |
| 2010-20 | 5/8 " | 16 | 10.0 | 13,500 |
| 2010-24 | 3/4 " | 18 | 14.3 | 19,400 |
| 2010-26 | 13/16" | 18 | 16.5 | 24,400 |
| 2010-28 | 7/8 " | 22 | 19.4 | 26,300 |
| 2010-32 | 1 " | 24 | 25.4 | 34,000 |
| 2010-36 | 1- 1/8 " | 28 | 35.0 | 46,000 |
| 2010-40 | 1- 1/4 " | 30 | 40.0 | 52,000 |
| 2010-45 | 1- 5/16" | 32 | 45.0 | 58,000 |
| 2010-50 | 1- 1/2 " | 36 | 58.0 | 74,000 |
| 2010-52 | 1- 5/8 " | 40 | 71.0 | 90,000 |
| 2010-54 | 1- 3/4 " | 42 | 85.0 | 106,000 |
| 2010-56 | 2 " | 48 | 102.0 | 126,000 |
| 2010-58 | 2- 1/8 " | 50 | 119.0 | 145,000 |
| 2010-60 | 2- 1/4 " | 56 | 138.0 | 166,000 |
| 2010-62 | 2- 1/2 " | 60 | 159.0 | 189,000 |
| 2010-64 | 2- 5/8 " | 64 | 181.0 | 213,000 |
| 2010-66 | 2- 3/4 " | 66 | 204.0 | 237,000 |
| 2010-68 | 3 " | 72 | 228.0 | 261,000 |
| 2010-70 | 3- 1/4 " | 80 | 282.0 | 319,000 |
Compliance to the above specifications is based upon testing
according to the Cordage Institute Standard Testing Methods for
Fiber Rope and/or ASTM D-4268 Standard Methods of Testing Fiber
Ropes.
Weights - Are average and may vary +/- 5%
Tensile strengths - Are approximate average for new, unused ropes.
To estimate the minimum tensile strength of a new rope, reduce the
approximate average by 15% (Cordage Institute defines minimum
tensile strength as two standard deviations below the average
tensile strength of the rope).
WORKING ELONGATION
SUNLIGHT/UV:
Very little degradation from UV. Can be used outside over long term if inspected regularly
CHEMICALS:
Good resistance to most minerals / organics, acids, alkalis, bleaches and other oxidizing agents and most solvents.
HEAT:
Melting point of 480°F, progressive strength loss above 300°F
DIELECTRICS:
Good resistance to the passage of electrical current. However in rope form, dirt, surface contaminants, water entrapment and the like can significantly affect dielectric properties. Extreme caution should be exercise any time a rope is in the proximity of live circuits.
SHEAVES:
Recommended D/d ratio is 8:1
WORKING LOADS:
No blanket working load recommendation can be made because it
depends on the application and conditions of use, especially
potential danger to personnel. It is recommended that the user
establish working loads and safety factors based on professional and
experienced assessments of risks. The working load is a guideline
for the use of a rope in good condition for non-critical
applications and should be reduced where life, limb, or valuable
property is involved. Or exceptional service such as shock,
sustained loading, severe vibration, etc. The Cordage Institute
specifies that the Safe Working Load of a rope shall be determined
by dividing the Minimum Tensile Strength by the Safety Factor.
Safety factors range from 5 to 12 for non-critical uses, 15 for life
lines.
SLK= Minimum Break Strength / Safety Factor
COLOR:
All diameters: White (no tracer)
Limited diameters: White/Gold (red tracer), Red (blue tracer),
Black (no tracer), Blue (red tracer), Teal (red tracer), Navy (no
tracer), & Hunter (no tracer)
STANDARD LENGTH:
Available in standard 600, 1200, & 2400 ft lengths
SPLICING INSTRUCTIONS:
Double Braid Eye Splice
| Model | Product Code | Color | Diameter | Length | Price |