
Product Description:
The industry leading polyester double braid. Low stretch and
durable line ideal for all applications requiring control lines,
positioning, lifting, or lowering. Also, used by clinicians
the world over for matching halters and leads.
Features:
- Soft, supple line that will not slip or stretch.
- Ideal for halters.
- Soft and Flexible
- Durable
- Spliceable
- Variety of Colors
- Available in diameters up to 3-1/2" (white only, other colors
available up to 3/4").
Applications:
- Lifting lines
- Lowering lines
- Multi-purpose
- Winch Lines
- Halters
- Leads
Colors Available:
Lengths Available:
| Size |
Weight |
Tensile |
| lbs/100' |
g/m |
lbs |
kg |
| 1/4" |
1.9 |
28.3 |
1,980 |
899 |
| 5/16" |
3.1 |
46.1 |
2,700 |
1,226 |
| 1/2" |
8.2 |
122.0 |
8,100 |
3,677 |
| 9/16" |
10.6 |
157.7 |
10,530 |
4,781 |
| 5/8" |
12.6 |
187.5 |
12,960 |
5,884 |
Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long
term if inspected regularly.
Chemicals:
Polyester has good resistance to most chemicals, except 95% sulfuric
acid and strong alkalines at boil.
Heat:
Polyester melts at 480°F with progressive strength loss above 300°F.
Dielectrics:
Good resistance to the passage of electrical current. However, dirt,
surface contaminants, water entrapment, and the like can
significantly affect dielectric properties. Extreme caution should
be exercised any time a rope is in the proximity of live circuits.
Sheaves:
Recommended sheave diameter to rope diameter is 8:1.
Working Loads:
No blanket safe working load (SWL) recommendations can be made for
any line because SWL's must be calculated based on application,
conditions of use, and potential danger to personnel among other
considerations. It is recommended that the end user establish
working loads and safety factors based on best practices established
by the end user's industry; by professional judgment and personal
experience; and after thorough assessment of all risks. The SWL is a
guideline for the use of a rope in good condition for non-critical
applications and should be reduced where life, limb, or valuable
property is involved, or in cases of exceptional service such as
shock loading, sustained loading, severe vibration, etc. The Cordage
Institute specifies that the SWL of a rope shall be determined by
dividing the Minimum Tensile Strength of the rope by a safety
factor. The safety factor ranges from 5 to 12 for non-critical uses
and is typically set at 15 for life lines.
|
|
|
Sta Set |
|
|
|
|
Product Code |
Diameter |
Color |
Length |
List Price |
Price per foot |
|
NE2100-06-00600 |
3/16" |
White |
600' |
$146.16 |
N/A |
|
NE2100-08-00600 |
1/4" |
White |
600' |
$202.91 |
N/A |
|
NE2100-10-00600 |
5/16" |
White |
600' |
$269.73 |
N/A |
|
NE2100-12-00600 |
3/8" |
White |
600' |
$373.23 |
N/A |
|
NE2100-14-00600 |
7/16" |
White |
600' |
$482.85 |
N/A |
|
NE2100-16-00600 |
1/2" |
White |
600' |
$562.55 |
N/A |
|
NE2100-18-00600 |
9/16" |
White |
600' |
$700.83 |
N/A |
|
NE2100-20-00600 |
5/8" |
White |
600' |
$822.51 |
N/A |
|
NE2100-24-00600 |
3/4" |
White |
600' |
$1,013.63 |
N/A |
|
NE2100-28-00600 |
7/8" |
White |
600' |
$1,378.13 |
N/A |
|
NE2100-32-00600 |
1" |
White |
600' |
$1,773.00 |
N/A |
|
NE2100-36-00600 |
1 1/8" |
White |
600' |
$2,016.00 |
N/A |
|
NE2100-40-00600 |
1 1/4" |
White |
600' |
$2,446.88 |
N/A |
|
NE211X-06-00600 |
3/16" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$147.42 |
N/A |
|
NE211X-08-00600 |
1/4" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$213.84 |
Blue, Red, Black, Solid Black, & Green all in stock by the foot
($0.60) |
|
NE211X-10-00600 |
5/16" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$280.67 |
N/A |
|
NE211X-12-00600 |
3/8" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$365.72 |
N/A |
|
NE211X-14-00600 |
7/16" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$472.64 |
N/A |
|
NE211X-16-00600 |
1/2" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$591.71 |
N/A |
|
NE211X-18-00600 |
9/16" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$734.76 |
N/A |
|
NE211X-20-00600 |
5/8" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$831.38 |
N/A |
|
NE211X-24-00600 |
3/4" |
Fleck Colors Use the following color codes when ordering: X:
1=RED, 2=Green, 3=Blue, 4=Black |
600' |
$1,039.50 |
N/A |
|
NE210X-06-00600 |
3/16" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$161.28 |
N/A |
|
NE210X-08-00600 |
1/4" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$228.42 |
N/A |
|
NE210X-10-00600 |
5/16" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$312.26 |
N/A |
|
NE210X-12-00600 |
3/8" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$394.88 |
N/A |
|
NE210X-14-00600 |
7/16" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$512.73 |
N/A |
|
NE210X-16-00600 |
1/2" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$640.31 |
N/A |
|
NE210X-18-00600 |
9/16" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$797.94 |
N/A |
|
NE210X-20-00600 |
5/8" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$903.38 |
N/A |
|
NE210X-24-00600 |
3/4" |
Use the following color codes when ordering: X: 1=RED,
2=Green, 3=Blue, 4=Black* (*Solid Only) |
600' |
$1,154.25 |
N/A |
Larger Diameters Available,
Email for Price Quote
|